J-534
UMETA Grease Fittings according to SAE
In general, our hydraulic-type grease fittings according to SAE are made of steel, case-hardened, zinc-plated, passivated and featured with a special surface treatment. For safety reasons and in order to avoid abrasion wear, the standard for SAE-grease fittings demands a specific surface hardness of 83 HR15 N minimum according to Rockwell hardness procedure. Therefore, we operate this decisive process in our own curing oven. We offer various standard types also in stainless steel SST303.
Special Information
For a better overview we added the international Alemite-reference numbers to our grease fittings.
A general comparison of the relevant types you will find
Hydraulic-Type Grease Fittings H according to SAE J-534
Flush-type grease fittings
Button-Head Grease Fittings (USA Version)
Adapter / elbow bodies (USA-Version)
Grease Fitting Assortments SAE J-534
Plugs according to SAE J-534
You are here
UMETA Grease Fittings according to SAE
J-534
UMETA Grease Fittings according to SAE
UMETA TWIN-LOCK system – The life insurance for your machines and equipment
When maintaining your high quality machines and equipment, you should absolutely avoid quasi-lubrication!
What does quasi-lubrication mean?
Upon continuous operation, abrasion can easily take place between the metal piston and the metal cylinder of the grease gun. For this reason, the grease at the top of the piston can be pressed back into the cartridge at a low operating pressure without being noticed. In spite of all effort, no grease will be transported to the lubrication spot. In order not to expose your machines to this risk, we developed the UMETA TWIN-LOCK system.
In connection with two special sealing elements, it protects the precision piston from wear upon continuous operation. By the special arrangement of the sealing elements, the UMETA TWIN-LOCK system avoids quasi-lubrication and grease escaping the piston. The sealing elements are designed in a way that they adjust themselves to the corresponding operating pressure with respect to their sealing effect.
UMETA EVER-FLOW SYSTEM
The EVER-FLOW system invented by UMETA ensures perfetct functioning of the UMETA TWIN-LOCK gun, even with thick grease and at the lowest temperatures.
This is ensured by an outlet valve equipped with a special ball stopper. Even semifluid biological grease will easily be transported by the vacuum developing during the pumping process.
This is another advantage of UMETA’s, where many other competitors’ products fail.
® UMETA HERMANN ULRICHSKÖTTER METALLWARENFABRIK GMBH & GO. KG
Technische Umsetzung by ByteCrafter | S.Faust