DIN 71412
Hydraulic-Type Grease Nipples according
UMETA hydraulic grease nipples according to DIN 71412
– standard made of steel, case hardened
– zinc-plated and passivated
– with tapered thread
With the Umeta SafeLube-system
you are always on the safe side due to:
- special designed springs
- specific interior geometry
- high-quality balls
- inhouse case hardening according to DIN
make our grease nipples
- extremely leakproof and you avoid unnecessary loss of grease
- durably and wear-resistant
- permeable, even under high pressure
. . . and therefore simply a good choice!
APPLICATION AREA
UMETA hydraulic-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. Due to their multi-purpose field of application, they are the most commonly used types of grease nipples.
VERSIONS
In general, our hydraulic-type grease nipples according to DIN are made of steel, case-hardened, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm /0.256″ – 0.008″. For safety reasons and in order to avoid abrasion wear, the standard demands 550 HV (Vickers) as a minimum for a surface hardness. Therefore, we operate this decisive process in our own curing oven. We offer various standard types also in brass or stainless steel SST303 + SST316L (V2A/V4A). Of course, our hydraulic-type nipples are also available in different angle versions, with a self-forming thread, or as drive-in type.
SPECIAL VERSIONS
Upon request, UMETA manufactures hydraulic-type nipples in other versions, with respect to e. g.
- dimension
- material
- thread size
- thread form (e. g. with cylindrical thread)
- different opening pressure
- surface colour (e. g. yellow passivated)
- further surface treatment
- unhardened
- etc.
MOUNTING INSTRUCTIONS
In order to allow for a proper lubrication with all common grease guns, the head space, which is necessary for installation, should be considered (please see table with dimensions).
OPERATING INSTRUCTIONS
As suitable lubricating nozzle, we recommend our hydraulic couplers.
Hydraulic grease nipples Type H1
straight version A - 180°
Hydraulic grease nipple Type H2
angled version B - 45°/67°
Hydraulic grease nipples Type H3
angled version C - 90°
Hydraulic grease nipples Type H1/S with self-forming thread
straight version A - 180°
Hydraulic grease nipples Type H2/S with self-forming thread
angled version B - 45°
Hydraulic grease nipples Type H3/S with self-forming thread
angled version C - 90°
Hydraulic grease nipple Type H2a, drive-in-Version
straight version A - 180°
Hydraulic grease nipple Type H2a, drive-in-version
angled form B - 45°
Hydraulic grease nipples Type H3a, drive-in-Version
angled version C - 90°
You are here
Hydraulic-Type Grease Nipples according
DIN 71412
Hydraulic-Type Grease Nipples according
UMETA TWIN-LOCK system – The life insurance for your machines and equipment
When maintaining your high quality machines and equipment, you should absolutely avoid quasi-lubrication!
What does quasi-lubrication mean?
Upon continuous operation, abrasion can easily take place between the metal piston and the metal cylinder of the grease gun. For this reason, the grease at the top of the piston can be pressed back into the cartridge at a low operating pressure without being noticed. In spite of all effort, no grease will be transported to the lubrication spot. In order not to expose your machines to this risk, we developed the UMETA TWIN-LOCK system.
In connection with two special sealing elements, it protects the precision piston from wear upon continuous operation. By the special arrangement of the sealing elements, the UMETA TWIN-LOCK system avoids quasi-lubrication and grease escaping the piston. The sealing elements are designed in a way that they adjust themselves to the corresponding operating pressure with respect to their sealing effect.
UMETA EVER-FLOW SYSTEM
The EVER-FLOW system invented by UMETA ensures perfetct functioning of the UMETA TWIN-LOCK gun, even with thick grease and at the lowest temperatures.
This is ensured by an outlet valve equipped with a special ball stopper. Even semifluid biological grease will easily be transported by the vacuum developing during the pumping process.
This is another advantage of UMETA’s, where many other competitors’ products fail.
® UMETA HERMANN ULRICHSKÖTTER METALLWARENFABRIK GMBH & GO. KG
Technische Umsetzung by ByteCrafter | S.Faust